ASUS Z99m и звук.

Как начинающий линуксовод прошу помощи с установкой драйверов на ASUS Z99m AMD Turion64x2.
Просто Виндовс полностью достал причем разные лицензионные версии своими глюками и постоянными тормозами а еше обновлениями не нужными и не стабильностью работы!!!
достал так что выкинул в месте с компом! Теперь на свой старенький ASUS поставил линукс версии 2010 бесплатной и рад как младенец только звука нету и дрова как ставить не знаю ведь (EXE)шным файлом не запустишь?
заранее благодарен любому ответу.

Разобрался!!!!! Оказывается надо просто не много почитать и умных людей послушать!!! таких как на этом форуме!!!
Огромное человеческое Вам СПАСИБО!!!

Еше одним линуксоводом прибыло!

Покажите вывод команды lspci

Покажите вывод команды lspci -v, не забывая про http://www.gentoo.ru/node/14464

Я Gentoo & Funtoo

заранее извеняюсь что так

заранее извеняюсь что так мнонг всего выскочило но я начинающий пользователь простите!

[mike@localhost ~]$ lspci -v
00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 1382
Flags: bus master, 66MHz, fast devsel, latency 0
Capabilities:

00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 1382
Flags: 66MHz, fast devsel

00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 1382
Flags: 66MHz, fast devsel

00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 1382
Flags: 66MHz, fast devsel

00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 1382
Flags: bus master, 66MHz, fast devsel, latency 0

00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 1382
Flags: bus master, 66MHz, fast devsel, latency 0
Capabilities:

00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 1382
Flags: 66MHz, fast devsel

00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 1382
Flags: 66MHz, fast devsel

00:02.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: df000000-dfefffff
Prefetchable memory behind bridge: 00000000da000000-00000000dbffffff
Capabilities:
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Capabilities:
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:04.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Capabilities:
Kernel driver in use: pcieport-driver
Kernel modules: shpchp

00:05.0 VGA compatible controller: nVidia Corporation C51 [GeForce Go 6100] (rev a2) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. MCP51 PCI-X GeForce Go 6100
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 5
Memory at de000000 (32-bit, non-prefetchable) [=16M]
Memory at c0000000 (64-bit, prefetchable) [=256M]
Memory at dd000000 (64-bit, non-prefetchable) [=16M]
Expansion ROM at dcfe0000 [disabled] [=128K]
Capabilities:
Kernel modules: nouveau, nvidiafb

00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 13a7
Flags: bus master, 66MHz, fast devsel, latency 0
Capabilities:

00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a3)
Subsystem: ASUSTeK Computer Inc. Device 13a7
Flags: bus master, 66MHz, fast devsel, latency 0

00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a3)
Subsystem: ASUSTeK Computer Inc. Device 13a7
Flags: 66MHz, fast devsel, IRQ 7
I/O ports at 0600 [=64]
I/O ports at 0700 [=64]
Capabilities:
Kernel driver in use: nForce2_smbus
Kernel modules: i2c-nforce2

00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device 13a7
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
Memory at dcfde000 (32-bit, non-prefetchable) [=4K]
Capabilities:
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd

00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device 13a7
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
Memory at dcfdfc00 (32-bit, non-prefetchable) [=256]
Capabilities:
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd

00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev a1) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device 13a7
Flags: bus master, 66MHz, fast devsel, latency 0
[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [=8]
[virtual] Memory at 000003f0 (type 3, non-prefetchable) [=1]
[virtual] Memory at 00000170 (32-bit, non-prefetchable) [=8]
[virtual] Memory at 00000370 (type 3, non-prefetchable) [=1]
I/O ports at ffa0 [=16]
Capabilities:
Kernel driver in use: pata_amd
Kernel modules: pata_acpi, pata_amd, ata_generic, amd74xx, ide-pci-generic

00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device 13a7
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
I/O ports at c800 [=8]
I/O ports at c480 [=4]
I/O ports at c400 [=8]
I/O ports at c080 [=4]
I/O ports at c000 [=16]
Memory at dcfdd000 (32-bit, non-prefetchable) [=4K]
Capabilities:
Kernel driver in use: sata_nv
Kernel modules: pata_acpi, sata_nv, ata_generic, ide-pci-generic

00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode])
Flags: bus master, 66MHz, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=64
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: dff00000-dfffffff
Capabilities:

00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2)
Subsystem: ASUSTeK Computer Inc. Device 1153
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
Memory at dcfd8000 (32-bit, non-prefetchable) [=16K]
Capabilities:
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Flags: fast devsel
Capabilities:

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Flags: fast devsel

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Flags: fast devsel
Kernel modules: amd64_edac_mod

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Flags: fast devsel
Capabilities:
Kernel driver in use: k8temp
Kernel modules: k8temp

05:00.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device 13a7
Flags: bus master, medium devsel, latency 64, IRQ 17
Memory at dfffe800 (32-bit, non-prefetchable) [=2K]
Capabilities:
Kernel driver in use: ohci1394
Kernel modules: ohci1394

05:00.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19)
Subsystem: ASUSTeK Computer Inc. Device 13a7
Flags: bus master, medium devsel, latency 64, IRQ 18
Memory at dffff000 (32-bit, non-prefetchable) [=256]
Capabilities:
Kernel driver in use: sdhci-pci
Kernel modules: sdhci-pci

05:00.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 0a)
Subsystem: ASUSTeK Computer Inc. Device 13a7
Flags: medium devsel, IRQ 5
Memory at dffff400 (32-bit, non-prefetchable) [=256]
Capabilities:
Kernel driver in use: ricoh-mmc
Kernel modules: ricoh_mmc

05:00.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 05)
Subsystem: ASUSTeK Computer Inc. Device 13a7
Flags: medium devsel, IRQ 5
Memory at dffff800 (32-bit, non-prefetchable) [=256]
Capabilities:

05:00.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff) (prog-if ff)
!!! Unknown header type 7f

05:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: ASUSTeK Computer Inc. L8400B or L3C/S notebook
Flags: bus master, medium devsel, latency 64, IRQ 19
I/O ports at e800 [=256]
Memory at dfffe400 (32-bit, non-prefetchable) [=256]
Capabilities:
Kernel driver in use: 8139too
Kernel modules: 8139too, 8139cp

Покажите вывод

Покажите вывод команд

  • zegrep HDA_ /proc/config.gz
    

    Если предыдущая команда не сработает, то

    grep HDA_ /usr/src/linux/.config
    
  • eix -Ic alsa
    

    Возможно, придётся установить app-portage/eix, ещё не раз пригодится

  • /etc/init.d/alsasound status
    

P.S. Советую всё же прислушаться.

Я Gentoo & Funtoo

[mike@localhost ~]$ zegrep

[mike@localhost ~]$ zegrep HDA_ /proc/config.gz
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_JACK=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_NVHDMI=y
CONFIG_SND_HDA_CODEC_INTELHDMI=y
CONFIG_SND_HDA_ELD=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
[mike@localhost ~]$

emerge

  • emerge media-sound/alsa-utils
    

    Должны «вытянуться» и media-sound/alsa-headers, media-libs/alsa-lib

  • rc-update add alsasound boot
    
  • alsaconf
    alsamixer
    

Я Gentoo & Funtoo

ereminmike написал(а): достал

ereminmike написал(а):
достал так что выкинул в месте с компом!

адрес помойки не подскажете? :)

новая горбушка 2-ой этаж.

новая горбушка 2-ой этаж.

Настройки просмотра комментариев

Выберите нужный метод показа комментариев и нажмите "Сохранить установки".