alsa глюкануло

только alsa-utils.
пересборка alsa-lib и alsa-headers ничего не дала 8(

Linux version 2.6.19-gentoo-r5 (root@bTch) (gcc version 4.1.1 (Gentoo 4.1.1)) #7 SMP Tue Apr 3 19:34:48 EEST 2007
Command line: root=/dev/hda9
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009c000 (usable)
BIOS-e820: 000000000009c000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 156) 0 entries of 3200 used
Entering add_active_range(0, 256, 131056) 1 entries of 3200 used
end_pfn_map = 1048576
DMI 2.2 present.
ACPI: RSDP (v000 Nvidia ) @ 0x00000000000f81b0
ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000001fff3040
ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000001fff30c0
ACPI: MCFG (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000001fff94c0
ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x000000001fff9400
ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x0000000000000000
Scanning NUMA topology in Northbridge 24
Number of nodes 1
Node 0 MemBase 0000000000000000 Limit 000000001fff0000
Entering add_active_range(0, 0, 156) 0 entries of 3200 used
Entering add_active_range(0, 256, 131056) 1 entries of 3200 used
NUMA: Using 63 for the hash shift.
Using node hash shift of 63
Bootmem setup node 0 0000000000000000-000000001fff0000
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
early_node_map[2] active PFN ranges
0: 0 -> 156
0: 256 -> 131056
On node 0 totalpages: 130956
DMA zone: 56 pages used for memmap
DMA zone: 1397 pages reserved
DMA zone: 2543 pages, LIFO batch:0
DMA32 zone: 1735 pages used for memmap
DMA32 zone: 125225 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Nosave address range: 000000000009c000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000f0000
Nosave address range: 00000000000f0000 - 0000000000100000
Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
PERCPU: Allocating 32512 bytes of per cpu data
Built 1 zonelists. Total pages: 127768
Kernel command line: root=/dev/hda9
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Checking aperture...
CPU 0: aperture @ 8050000000 size 32 MB
Aperture too small (32 MB)
No AGP bridge found
Memory: 509964k/524224k available (2970k kernel code, 13860k reserved, 1544k data, 352k init)
Calibrating delay using timer specific routine.. 4023.21 BogoMIPS (lpj=8046427)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/0 -> Node 0
SMP alternatives: switching to UP code
Freeing SMP alternatives: 36k freed
ACPI: Core revision 20060707
Using local APIC timer interrupts.
result 12564447
Detected 12.564 MHz APIC timer.
Brought up 1 CPUs
testing NMI watchdog ... OK.
time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
time.c: Detected 2010.309 MHz processor.
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000
PCI: No mmconfig possible on device 00:18
pci_get_subsys() called while pci_devices is still empty
pci_get_subsys() called while pci_devices is still empty
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:09.0
Boot video device is 0000:05:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 15 devices
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI-DMA: Disabling IOMMU.
pnp: 00:00: ioport range 0x1000-0x107f could not be reserved
pnp: 00:00: ioport range 0x1080-0x10ff has been reserved
pnp: 00:00: ioport range 0x1400-0x147f has been reserved
pnp: 00:00: ioport range 0x1480-0x14ff could not be reserved
pnp: 00:00: ioport range 0x1800-0x187f has been reserved
pnp: 00:00: ioport range 0x1880-0x18ff has been reserved
PCI: Bridge: 0000:00:09.0
IO window: d000-dfff
MEM window: fe900000-fe9fffff
PREFETCH window: fea00000-feafffff
PCI: Bridge: 0000:00:0b.0
IO window: c000-cfff
MEM window: fe800000-fe8fffff
PREFETCH window: fe700000-fe7fffff
PCI: Bridge: 0000:00:0c.0
IO window: b000-bfff
MEM window: fe600000-fe6fffff
PREFETCH window: fe500000-fe5fffff
PCI: Bridge: 0000:00:0d.0
IO window: a000-afff
MEM window: fe400000-fe4fffff
PREFETCH window: fe300000-fe3fffff
PCI: Bridge: 0000:00:0e.0
IO window: 9000-9fff
MEM window: fb000000-fdffffff
PREFETCH window: d0000000-dfffffff
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
TCP established hash table entries: 16384 (order: 6, 262144 bytes)
TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
Total HugeTLB memory allocated, 0
Installing knfsd (copyright (C) 1996

).
NTFS driver 2.1.27 [Flags: R/W].
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Linking AER extended capability on 0000:00:0b.0
PCI: Found HT MSI mapping on 0000:00:0b.0 with capability disabled
PCI: Found HT MSI mapping on 0000:00:00.0 with capability enabled
PCI: Linking AER extended capability on 0000:00:0c.0
PCI: Found HT MSI mapping on 0000:00:0c.0 with capability disabled
PCI: Found HT MSI mapping on 0000:00:00.0 with capability enabled
PCI: Linking AER extended capability on 0000:00:0d.0
PCI: Found HT MSI mapping on 0000:00:0d.0 with capability disabled
PCI: Found HT MSI mapping on 0000:00:00.0 with capability enabled
PCI: Linking AER extended capability on 0000:00:0e.0
PCI: Found HT MSI mapping on 0000:00:0e.0 with capability disabled
PCI: Found HT MSI mapping on 0000:00:00.0 with capability enabled
PCI: Setting latency timer of device 0000:00:0b.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0b.0:pcie00]
Allocate Port Service[0000:00:0b.0:pcie03]
PCI: Setting latency timer of device 0000:00:0c.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
Allocate Port Service[0000:00:0c.0:pcie03]
PCI: Setting latency timer of device 0000:00:0d.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0:pcie00]
Allocate Port Service[0000:00:0d.0:pcie03]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
pcie_portdrv_probe->Dev[005d:10de] has invalid IRQ. Check vendor BIOS
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0:pcie00]
Allocate Port Service[0000:00:0e.0:pcie03]
Real Time Clock Driver v1.12ac
Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec (nowayout= 0)
Linux agpgart interface v0.101 (c) Dave Jones
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Fan [FAN] (on)
ACPI: Getting cpuindex for acpiid 0x1
ACPI: Thermal Zone [THRM] (39 C)
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
nbd: registered device at major 43
PPP generic driver version 2.4.2
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
NFORCE-CK804: chipset revision 162
NFORCE-CK804: not 100% native mode: will probe irqs later
NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xe800-0xe807, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xe808-0xe80f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: SAMSUNG SP1203N, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdd: _NEC DVD_RW ND-4571A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 234493056 sectors (120060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 >
hdd: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 23, io mem 0xfeb00000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 22, io mem 0xfebff000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
USB Universal Host Controller Interface driver v3.0
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
oprofile: using NMI interrupt.
Netfilter messages via NETLINK v0.30.
IPv4 over IPv4 tunneling driver
ip_conntrack version 2.4 (2047 buckets, 16376 max) - 312 bytes per conntrack
input: AT Translated Set 2 keyboard as /class/input/input0
ctnetlink v0.90: registering with nfnetlink.
ip_tables: (C) 2000-2006 Netfilter Core Team
arp_tables: (C) 2002 David S. Miller
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (version 2.00.00)
powernow-k8: BIOS error - no PSB or ACPI _PSS objects
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
input: ImPS/2 Generic Wheel Mouse as /class/input/input1
ReiserFS: hda9: found reiserfs format "3.6" with standard journal
ReiserFS: hda9: using ordered data mode
ReiserFS: hda9: journal params: device hda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda9: checking transaction log (hda9)
ReiserFS: hda9: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 352k freed
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.57.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:0a.0 to 64
forcedeth: using HIGHDMA
eth0: forcedeth.c: subsystem: 0105b:0ca5 bound to 0000:00:0a.0
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:01:0a.0: 3Com PCI 3c905C Tornado at ffffc20000048000.
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
snd-ca0106: Model 1006 Rev 00000000 Serial 10061102
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:05:00.0 to 64
NVRM: loading NVIDIA Linux x86_64 Kernel Module 1.0-8776 Mon Oct 16 21:53:43 PDT 2006
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 819272k swap on /dev/hda6. Priority:-1 extents:1 across:819272k
eth2: setting half-duplex.
eth0: no link during initialization.
eth2: Transmit error, Tx status register 82.
Probably a duplex mismatch. See Documentation/networking/vortex.txt
Flags; bus-master 1, dirty 133(5) current 133(5)
Transmit list 00000000 vs. ffff81001e29b520.
0: @ffff81001e29b200 length 8000004a status 0001004a
1: @ffff81001e29b2a0 length 8000004e status 0001004e
2: @ffff81001e29b340 length 8000004e status 0001004e
3: @ffff81001e29b3e0 length 80000042 status 00010042
4: @ffff81001e29b480 length 80000598 status 8c010598
5: @ffff81001e29b520 length 80000042 status 00010042
6: @ffff81001e29b5c0 length 80000042 status 00010042
7: @ffff81001e29b660 length 8000004e status 0001004e
8: @ffff81001e29b700 length 8000004e status 0001004e
9: @ffff81001e29b7a0 length 8000004e status 0001004e
10: @ffff81001e29b840 length 8000004e status 0001004e
11: @ffff81001e29b8e0 length 80000042 status 00010042
12: @ffff81001e29b980 length 80000042 status 00010042
13: @ffff81001e29ba20 length 80000042 status 00010042
14: @ffff81001e29bac0 length 80000042 status 00010042
15: @ffff81001e29bb60 length 8000004a status 0001004a
eth2: Transmit error, Tx status register 82.
Probably a duplex mismatch. See Documentation/networking/vortex.txt
Flags; bus-master 1, dirty 960(0) current 960(0)
Transmit list 00000000 vs. ffff81001e29b200.
0: @ffff81001e29b200 length 80000042 status 00010042
1: @ffff81001e29b2a0 length 80000042 status 00010042
2: @ffff81001e29b340 length 8000004e status 0001004e
3: @ffff81001e29b3e0 length 8000004e status 0001004e
4: @ffff81001e29b480 length 80000042 status 00010042
5: @ffff81001e29b520 length 80000042 status 00010042
6: @ffff81001e29b5c0 length 80000036 status 00010036
7: @ffff81001e29b660 length 8000004a status 0001004a
8: @ffff81001e29b700 length 80000042 status 00010042
9: @ffff81001e29b7a0 length 8000022f status 0c01022f
10: @ffff81001e29b840 length 80000042 status 00010042
11: @ffff81001e29b8e0 length 80000042 status 00010042
12: @ffff81001e29b980 length 8000004a status 0001004a
13: @ffff81001e29ba20 length 80000042 status 00010042
14: @ffff81001e29bac0 length 80000228 status 0c010228
15: @ffff81001e29bb60 length 8000029e status 8c01029e
eth2: Transmit error, Tx status register 82.
Probably a duplex mismatch. See Documentation/networking/vortex.txt
Flags; bus-master 1, dirty 1599(15) current 1599(15)
Transmit list 00000000 vs. ffff81001e29bb60.
0: @ffff81001e29b200 length 8000004e status 0001004e
1: @ffff81001e29b2a0 length 80000042 status 00010042
2: @ffff81001e29b340 length 800000dc status 0c0100dc
3: @ffff81001e29b3e0 length 80000042 status 00010042
4: @ffff81001e29b480 length 8000023f status 0c01023f
5: @ffff81001e29b520 length 80000042 status 00010042
6: @ffff81001e29b5c0 length 80000042 status 00010042
7: @ffff81001e29b660 length 80000042 status 00010042
8: @ffff81001e29b700 length 80000042 status 00010042
9: @ffff81001e29b7a0 length 8000004e status 0001004e
10: @ffff81001e29b840 length 8000004a status 0001004a
11: @ffff81001e29b8e0 length 8000004a status 0001004a
12: @ffff81001e29b980 length 8000004a status 0001004a
13: @ffff81001e29ba20 length 80000042 status 00010042
14: @ffff81001e29bac0 length 800005a7 status 8c0105a7
15: @ffff81001e29bb60 length 8000004e status 0001004e
eth2: Transmit error, Tx status register 82.
Probably a duplex mismatch. See Documentation/networking/vortex.txt
Flags; bus-master 1, dirty 2108(12) current 2108(12)
Transmit list 00000000 vs. ffff81001e29b980.
0: @ffff81001e29b200 length 80000042 status 00010042
1: @ffff81001e29b2a0 length 8000004a status 0001004a
2: @ffff81001e29b340 length 8000004a status 0001004a
3: @ffff81001e29b3e0 length 80000042 status 00010042
4: @ffff81001e29b480 length 8000004a status 0001004a
5: @ffff81001e29b520 length 80000042 status 00010042
6: @ffff81001e29b5c0 length 80000042 status 00010042
7: @ffff81001e29b660 length 80000042 status 00010042
8: @ffff81001e29b700 length 80000042 status 00010042
9: @ffff81001e29b7a0 length 8000004e status 0001004e
10: @ffff81001e29b840 length 800005c2 status 0c0105c2
11: @ffff81001e29b8e0 length 80000056 status 80010056
12: @ffff81001e29b980 length 80000042 status 00010042
13: @ffff81001e29ba20 length 80000042 status 00010042
14: @ffff81001e29bac0 length 80000042 status 00010042
15: @ffff81001e29bb60 length 80000042 status 00010042
eth2: Transmit error, Tx status register 82.
Probably a duplex mismatch. See Documentation/networking/vortex.txt
Flags; bus-master 1, dirty 2173(13) current 2173(13)
Transmit list 00000000 vs. ffff81001e29ba20.
0: @ffff81001e29b200 length 80000036 status 00010036
1: @ffff81001e29b2a0 length 8000004e status 0001004e
2: @ffff81001e29b340 length 80000042 status 00010042
3: @ffff81001e29b3e0 length 8000004e status 0001004e
4: @ffff81001e29b480 length 80000042 status 00010042
5: @ffff81001e29b520 length 80000238 status 0c010238
6: @ffff81001e29b5c0 length 80000042 status 00010042
7: @ffff81001e29b660 length 8000004a status 0001004a
8: @ffff81001e29b700 length 80000042 status 00010042
9: @ffff81001e29b7a0 length 800005c0 status 0c0105c0
10: @ffff81001e29b840 length 8000004a status 0001004a
11: @ffff81001e29b8e0 length 80000042 status 00010042
12: @ffff81001e29b980 length 8000022c status 8c01022c
13: @ffff81001e29ba20 length 80000201 status 0c010201
14: @ffff81001e29bac0 length 80000042 status 00010042
15: @ffff81001e29bb60 length 80000201 status 0c010201
eth2: Transmit error, Tx status register 82.
Probably a duplex mismatch. See Documentation/networking/vortex.txt
Flags; bus-master 1, dirty 3312(0) current 3312(0)
Transmit list 00000000 vs. ffff81001e29b200.
0: @ffff81001e29b200 length 80000042 status 00010042
1: @ffff81001e29b2a0 length 8000032e status 0c01032e
2: @ffff81001e29b340 length 80000255 status 0c010255
3: @ffff81001e29b3e0 length 80000042 status 00010042
4: @ffff81001e29b480 length 80000042 status 00010042
5: @ffff81001e29b520 length 80000042 status 00010042
6: @ffff81001e29b5c0 length 80000042 status 00010042
7: @ffff81001e29b660 length 8000004a status 0001004a
8: @ffff81001e29b700 length 80000042 status 00010042
9: @ffff81001e29b7a0 length 80000042 status 00010042
10: @ffff81001e29b840 length 800003aa status 0c0103aa
11: @ffff81001e29b8e0 length 80000042 status 00010042
12: @ffff81001e29b980 length 80000042 status 00010042
13: @ffff81001e29ba20 length 80000042 status 00010042
14: @ffff81001e29bac0 length 80000042 status 00010042
15: @ffff81001e29bb60 length 800003a0 status 8c0103a0
eth2: Transmit error, Tx status register 82.
Probably a duplex mismatch. See Documentation/networking/vortex.txt
Flags; bus-master 1, dirty 4147(3) current 4147(3)
Transmit list 00000000 vs. ffff81001e29b3e0.
0: @ffff81001e29b200 length 8000004a status 0001004a
1: @ffff81001e29b2a0 length 80000042 status 00010042
2: @ffff81001e29b340 length 800004e8 status 8c0104e8
3: @ffff81001e29b3e0 length 80000042 status 00010042
4: @ffff81001e29b480 length 80000042 status 00010042
5: @ffff81001e29b520 length 80000036 status 00010036
6: @ffff81001e29b5c0 length 80000042 status 00010042
7: @ffff81001e29b660 length 80000042 status 00010042
8: @ffff81001e29b700 length 80000042 status 00010042
9: @ffff81001e29b7a0 length 80000042 status 00010042
10: @ffff81001e29b840 length 80000042 status 00010042
11: @ffff81001e29b8e0 length 80000042 status 00010042
12: @ffff81001e29b980 length 80000042 status 00010042
13: @ffff81001e29ba20 length 80000042 status 00010042
14: @ffff81001e29bac0 length 80000042 status 00010042
15: @ffff81001e29bb60 length 80000042 status 00010042
eth2: Transmit error, Tx status register 82.
Probably a duplex mismatch. See Documentation/networking/vortex.txt
Flags; bus-master 1, dirty 5172(4) current 5172(4)
Transmit list 00000000 vs. ffff81001e29b480.
0: @ffff81001e29b200 length 8000004e status 0001004e
1: @ffff81001e29b2a0 length 80000042 status 00010042
2: @ffff81001e29b340 length 80000042 status 00010042
3: @ffff81001e29b3e0 length 800004f0 status 8c0104f0
4: @ffff81001e29b480 length 80000042 status 00010042
5: @ffff81001e29b520 length 80000042 status 00010042
6: @ffff81001e29b5c0 length 80000042 status 00010042
7: @ffff81001e29b660 length 80000042 status 00010042
8: @ffff81001e29b700 length 80000042 status 00010042
9: @ffff81001e29b7a0 length 80000042 status 00010042
10: @ffff81001e29b840 length 8000004e status 0001004e
11: @ffff81001e29b8e0 length 8000004e status 0001004e
12: @ffff81001e29b980 length 8000004e status 0001004e
13: @ffff81001e29ba20 length 8000004a status 0001004a
14: @ffff81001e29bac0 length 8000004a status 0001004a
15: @ffff81001e29bb60 length 8000004e status 0001004e
eth2: Transmit error, Tx status register 82.
Probably a duplex mismatch. See Documentation/networking/vortex.txt
Flags; bus-master 1, dirty 5228(12) current 5228(12)
Transmit list 00000000 vs. ffff81001e29b980.
0: @ffff81001e29b200 length 80000042 status 00010042
1: @ffff81001e29b2a0 length 80000042 status 00010042
2: @ffff81001e29b340 length 80000042 status 00010042
3: @ffff81001e29b3e0 length 80000042 status 00010042
4: @ffff81001e29b480 length 80000042 status 00010042
5: @ffff81001e29b520 length 80000042 status 00010042
6: @ffff81001e29b5c0 length 8000004a status 0001004a
7: @ffff81001e29b660 length 80000042 status 00010042
8: @ffff81001e29b700 length 8000054f status 0c01054f
9: @ffff81001e29b7a0 length 8000004a status 0001004a
10: @ffff81001e29b840 length 80000042 status 00010042
11: @ffff81001e29b8e0 length 8000052d status 8c01052d
12: @ffff81001e29b980 length 80000042 status 00010042
13: @ffff81001e29ba20 length 80000042 status 00010042
14: @ffff81001e29bac0 length 80000042 status 00010042
15: @ffff81001e29bb60 length 80000042 status 00010042
eth2: Transmit error, Tx status register 82.
Probably a duplex mismatch. See Documentation/networking/vortex.txt
Flags; bus-master 1, dirty 5454(14) current 5454(14)
Transmit list 00000000 vs. ffff81001e29bac0.
0: @ffff81001e29b200 length 80000042 status 00010042
1: @ffff81001e29b2a0 length 80000042 status 00010042
2: @ffff81001e29b340 length 80000042 status 00010042
3: @ffff81001e29b3e0 length 80000042 status 00010042
4: @ffff81001e29b480 length 8000004e status 0001004e
5: @ffff81001e29b520 length 8000004e status 0001004e
6: @ffff81001e29b5c0 length 8000004e status 0001004e
7: @ffff81001e29b660 length 8000004e status 0001004e
8: @ffff81001e29b700 length 80000042 status 00010042
9: @ffff81001e29b7a0 length 80000042 status 00010042
10: @ffff81001e29b840 length 8000004a status 0001004a
11: @ffff81001e29b8e0 length 80000042 status 00010042
12: @ffff81001e29b980 length 8000004a status 0001004a
13: @ffff81001e29ba20 length 80000526 status 8c010526
14: @ffff81001e29bac0 length 8000004e status 0001004e
15: @ffff81001e29bb60 length 8000004e status 0001004e
eth2: Transmit error, Tx status register 82.
Probably a duplex mismatch. See Documentation/networking/vortex.txt
Flags; bus-master 1, dirty 9767(7) current 9769(9)
Transmit list 1e29b700 vs. ffff81001e29b660.
0: @ffff81001e29b200 length 8000004a status 0001004a
1: @ffff81001e29b2a0 length 8000004a status 0001004a
2: @ffff81001e29b340 length 8000004e status 0001004e
3: @ffff81001e29b3e0 length 80000042 status 00010042
4: @ffff81001e29b480 length 80000042 status 00010042
5: @ffff81001e29b520 length 80000042 status 00010042
6: @ffff81001e29b5c0 length 80000036 status 00010036
7: @ffff81001e29b660 length 800005cc status 0c0105cc
8: @ffff81001e29b700 length 800005c5 status 8c0005c5
9: @ffff81001e29b7a0 length 80000042 status 00010042
10: @ffff81001e29b840 length 80000042 status 00010042
11: @ffff81001e29b8e0 length 80000042 status 00010042
12: @ffff81001e29b980 length 80000042 status 00010042
13: @ffff81001e29ba20 length 8000004a status 0001004a
14: @ffff81001e29bac0 length 8000004e status 0001004e
15: @ffff81001e29bb60 length 8000004e status 0001004e
eth2: Transmit error, Tx status register 82.
Probably a duplex mismatch. See Documentation/networking/vortex.txt
Flags; bus-master 1, dirty 10028(12) current 10028(12)
Transmit list 00000000 vs. ffff81001e29b980.
0: @ffff81001e29b200 length 8000004e status 0001004e
1: @ffff81001e29b2a0 length 8000004e status 0001004e
2: @ffff81001e29b340 length 8000004e status 0001004e
3: @ffff81001e29b3e0 length 80000042 status 00010042
4: @ffff81001e29b480 length 80000042 status 00010042
5: @ffff81001e29b520 length 80000042 status 00010042
6: @ffff81001e29b5c0 length 80000042 status 00010042
7: @ffff81001e29b660 length 8000004a status 0001004a
8: @ffff81001e29b700 length 80000042 status 00010042
9: @ffff81001e29b7a0 length 8000004e status 0001004e
10: @ffff81001e29b840 length 80000042 status 00010042
11: @ffff81001e29b8e0 length 800005c4 status 8c0105c4
12: @ffff81001e29b980 length 80000042 status 00010042
13: @ffff81001e29ba20 length 80000042 status 00010042
14: @ffff81001e29bac0 length 80000042 status 00010042
15: @ffff81001e29bb60 length 8000004e status 0001004e
eth2: Transmit error, Tx status register 82.
Probably a duplex mismatch. See Documentation/networking/vortex.txt
Flags; bus-master 1, dirty 10160(0) current 10162(2)
Transmit list 00000000 vs. ffff81001e29b200.
0: @ffff81001e29b200 length 800005cb status 0c0105cb
1: @ffff81001e29b2a0 length 800005c4 status 8c0105c4
2: @ffff81001e29b340 length 80000042 status 00010042
3: @ffff81001e29b3e0 length 80000042 status 00010042
4: @ffff81001e29b480 length 80000042 status 00010042
5: @ffff81001e29b520 length 80000042 status 00010042
6: @ffff81001e29b5c0 length 80000042 status 00010042
7: @ffff81001e29b660 length 8000004a status 0001004a
8: @ffff81001e29b700 length 8000004e status 0001004e
9: @ffff81001e29b7a0 length 8000004e status 0001004e
10: @ffff81001e29b840 length 8000004a status 0001004a
11: @ffff81001e29b8e0 length 8000004a status 0001004a
12: @ffff81001e29b980 length 8000004e status 0001004e
13: @ffff81001e29ba20 length 80000042 status 00010042
14: @ffff81001e29bac0 length 80000042 status 00010042
15: @ffff81001e29bb60 length 80000042 status 00010042
eth2: Transmit error, Tx status register 82.
Probably a duplex mismatch. See Documentation/networking/vortex.txt
Flags; bus-master 1, dirty 10186(10) current 10186(10)
Transmit list 00000000 vs. ffff81001e29b840.
0: @ffff81001e29b200 length 80000042 status 00010042
1: @ffff81001e29b2a0 length 80000042 status 00010042
2: @ffff81001e29b340 length 80000042 status 00010042
3: @ffff81001e29b3e0 length 8000004a status 0001004a
4: @ffff81001e29b480 length 8000004e status 0001004e
5: @ffff81001e29b520 length 8000004e status 0001004e
6: @ffff81001e29b5c0 length 80000042 status 00010042
7: @ffff81001e29b660 length 8000004e status 0001004e
8: @ffff81001e29b700 length 8000004e status 0001004e
9: @ffff81001e29b7a0 length 800005d5 status 8c0105d5
10: @ffff81001e29b840 length 80000042 status 00010042
11: @ffff81001e29b8e0 length 8000004e status 0001004e
12: @ffff81001e29b980 length 8000004e status 0001004e
13: @ffff81001e29ba20 length 80000042 status 00010042
14: @ffff81001e29bac0 length 80000042 status 00010042
15: @ffff81001e29bb60 length 80000042 status 00010042
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
snd-ca0106: Model 1006 Rev 00000000 Serial 10061102
eth0: no link during initialization.
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
snd-ca0106: Model 1006 Rev 00000000 Serial 10061102
eth2: Transmit error, Tx status register 82.
Probably a duplex mismatch. See Documentation/networking/vortex.txt
Flags; bus-master 1, dirty 14276(4) current 14276(4)
Transmit list 00000000 vs. ffff81001e29b480.
0: @ffff81001e29b200 length 8000004a status 0001004a
1: @ffff81001e29b2a0 length 8000004a status 0001004a
2: @ffff81001e29b340 length 80000042 status 00010042
3: @ffff81001e29b3e0 length 80000328 status 8c010328
4: @ffff81001e29b480 length 80000042 status 00010042
5: @ffff81001e29b520 length 80000042 status 00010042
6: @ffff81001e29b5c0 length 80000042 status 00010042
7: @ffff81001e29b660 length 80000042 status 00010042
8: @ffff81001e29b700 length 80000042 status 00010042
9: @ffff81001e29b7a0 length 80000042 status 00010042
10: @ffff81001e29b840 length 80000042 status 00010042
11: @ffff81001e29b8e0 length 80000042 status 00010042
12: @ffff81001e29b980 length 80000042 status 00010042
13: @ffff81001e29ba20 length 80000042 status 00010042
14: @ffff81001e29bac0 length 80000042 status 00010042
15: @ffff81001e29bb60 length 8000004c status 0c01004c
eth2: Transmit error, Tx status register 82.
Probably a duplex mismatch. See Documentation/networking/vortex.txt
Flags; bus-master 1, dirty 14321(1) current 14321(1)
Transmit list 00000000 vs. ffff81001e29b2a0.
0: @ffff81001e29b200 length 80000328 status 8c010328
1: @ffff81001e29b2a0 length 80000042 status 00010042
2: @ffff81001e29b340 length 80000042 status 00010042
3: @ffff81001e29b3e0 length 80000042 status 00010042
4: @ffff81001e29b480 length 80000042 status 00010042
5: @ffff81001e29b520 length 80000042 status 00010042
6: @ffff81001e29b5c0 length 80000042 status 00010042
7: @ffff81001e29b660 length 80000042 status 00010042
8: @ffff81001e29b700 length 80000042 status 00010042
9: @ffff81001e29b7a0 length 80000036 status 00010036
10: @ffff81001e29b840 length 800000d6 status 0c0100d6
11: @ffff81001e29b8e0 length 80000042 status 00010042
12: @ffff81001e29b980 length 80000042 status 00010042
13: @ffff81001e29ba20 length 80000042 status 00010042
14: @ffff81001e29bac0 length 8000004a status 0001004a
15: @ffff81001e29bb60 length 80000042 status 00010042